New boiler installation in Pelsall. Old boilers swapped for modern combis, with the gas supply, flue route and system cleaning sorted first.
Pelsall is a mix of village-edge older housing and the estates that went up around it, and the boilers follow the same split. The older properties along the common often still run a boiler and a hot water cylinder; the newer semis usually have a combi from the 2000s that is now on borrowed time.
Swapping either is a different job. Coming off a cylinder system to a combi frees up the airing cupboard but puts every hot tap on one appliance, so the size has to suit the number of bathrooms. Replacing an old combi is simpler, but the gas supply and the flue route still need checking rather than assuming what was there will do.
What decides the price is the pipework, the position and the state of the existing radiators, and all three are settled at the survey. Photos of the boiler, the meter and a radiator or two give us most of it before we arrive. If you ever smell gas, get out of the house, leave the switches alone and ring the National Gas Emergency line on 0800 111 999 from outside.
One bathroom usually suits a combi. Two bathrooms and a family often does not, and the honest answer saves an unhappy winter.
Measured, not assumed. An undersized pipe is the reason some new boilers lock out on the coldest day of the year.
A flush and a magnetic filter before the new boiler runs, so old sludge does not reach the new heat exchanger.
Where the flue exits and where the condensate drains decide what the job actually involves. Agreed before work starts.
Removed and disposed of, cupboard left usable, not stacked in the garden.
The new appliance is notified under building regulations and its guarantee registered in your name.
A like-for-like change is usually a day. Moving position or converting from a cylinder system runs to two, and you are told which before it starts.
Only if you move to a combi, and plenty of people keep the cupboard for the linen once the cylinder is gone.
Usually. The ones that stay cold at the bottom after a flush are the ones to think about replacing.
It comes from the radiators, the bathrooms and the hot water demand. Old boilers were often far bigger than the house needed.
Yes. The outside work is planned so the house is not left without heating overnight in a cold snap.
Pelsall, Brownhills, Clayhanger, Shelfield and the lanes between them.
Homeowner or landlord, we've got Brownhills covered: repairs, servicing, installs and certificates. Leave your details and a local engineer will get back to you fast.
Send a photo of the problem on WhatsApp for the quickest reply, or give us a call. You get a free, no-obligation quote, usually the same day.
